Description
Measure each watering session
See how much water passes through your hose run with the Bradas WL-3110 digital meter.
The LCD counts volume in litres or gallons. Use it to compare watering jobs, monitor a fill or keep a running total of water delivered.
One meter supplied. Match its threaded connections to your installation.
Two readings for different jobs
Choose the reading that matches what you want to track.
A single watering session
The upper counter records one-time volume. Use it to track a particular watering job or fill, following the pack instructions when clearing that reading.
A running total
The lower counter records total volume. Make a note of it before resetting if you want to compare usage across several sessions.
The unit and range
The displayed unit can be litres or gallons, with a counter range up to 999.9. Keep the same unit when comparing readings. This figure is a volume limit, not an instantaneous flow-rate specification.
Threaded at both ends
The top inlet is ¾-inch BSP female; the outlet is ¾-inch BSP male. The side view shows the moulded FLOW arrow to follow when fitting the meter.
These are BSP threads, rather than male or female garden click-lock sockets. To use a hose with a female quick connector, fit a suitable ¾-inch BSP female-to-male-quick-connect adapter to the meter's male outlet.
The optional tap adapter in Frequently bought together provides that interface. The separate hose-end connector shown there is for ½-inch hose; use existing compatible fittings where you already have them.
Turn off the water before assembly, use the sealing arrangement required by the connected fittings, and inspect the joints gradually with water. Keep the hose supported so it does not pull on the plastic body.
Estimate average flow from a timed reading
Volume divided by elapsed time gives an average rate.
With the display set to litres, note the starting volume, run the water for a measured time and note how many litres were delivered. Divide that volume by the number of minutes.
Example only: 12 litres delivered in 2 minutes = an average of 6 litres per minute.
This is a calculation from a timed volume reading. It does not mean the meter displays an instantaneous litres-per-minute value. Allow for the stated measuring tolerance when interpreting the result.
Read the result with its tolerance in mind
Small differences between readings need context.
The stated measuring tolerance is ±8% at 3-8 bar, and ±10% at 1-2 bar or 9-10 bar. Keep the installation and measuring conditions consistent when comparing watering sessions.
The meter requires a CR2032 battery. Follow the supplied pack instructions for battery handling, counter clearing and unit selection; record any totals you want to keep before using Clear or Reset.
This is a water-usage counter. Stop the water at the tap or another suitable valve when your job is finished; the meter does not close the supply when a chosen volume is reached.
Choosing and using the threaded meter
Will it stop the water after a set amount?
No. It measures delivered water volume and displays the reading. It is not an automatic shut-off valve or watering timer. Use the tap or another suitable control to stop the supply.
Does 999.9 mean litres per minute?
No. It is the stated counter range in litres or gallons. To estimate an average flow in litres per minute, divide a measured volume in litres by the elapsed time in minutes. The example above illustrates that calculation; it is not a claim that the LCD shows an instantaneous flow rate.
Can a female hose quick connector clip onto the outlet?
Not directly. The outlet is a ¾-inch BSP male thread, not a male garden click-lock spigot. A suitable ¾-inch BSP female adapter with a male garden quick-connect end provides the interface for a compatible female hose connector. Adapters and hose fittings are separate from the meter.
What battery does this model require?
The Bradas WL-3110 requires a CR2032 battery. Follow the instructions supplied with your pack for access and replacement, and record readings you want to retain before clearing or resetting the counters.
Product information & technical details
| SKU | WFM001 |
|---|---|
| Product type | |
| BSP thread size | 3/4" |
| Thread gender | Female |
| Colour | Grey, White |
| Material | Plastic |
| Model | Bradas WHITE LINE WL-3110 |
| Inlet | ¾-inch BSP female thread |
| Outlet | ¾-inch BSP male thread |
|---|---|
| Display units | Litres or gallons |
| Counter range | Up to 999.9 in the selected volume unit |
| Displayed readings | Upper: one-time/session volume; lower: cumulative total volume |
| Power | Requires one CR2032 battery |
| Stated measuring tolerance | ±8% at 3-8 bar; ±10% at 1-2 bar and 9-10 bar |
| Installation direction | Follow the FLOW arrow moulded into the body |
| Supplied contents | One meter; hose, tap and connection adapters not included |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
All our BSP threads are parallel (BSPP, to ISO 228), not tapered.
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.