Description
A hose connection for your ¾-inch BSP outlet
Fit this polypropylene bib tap to a matching ¾-inch BSP female connection, then attach your garden hose using a compatible female quick connector.
The orange turning knob controls the water at the tap. Its curved spout directs the quick-connect fitting downwards, keeping the hose attachment below the body.
A useful replacement or addition where the inlet thread matches your existing fitting. One tap supplied; hose and mounting accessories are separate.
Two connections to choose correctly
The tap’s inlet thread and your hose size describe different parts of the installation.
The threaded inlet
Match the ¾-inch BSP male thread to a ¾-inch BSP female fitting. A tank outlet with another thread needs an appropriate adapter; a similar outside diameter is not enough to establish a match.
The quick-connect outlet
A compatible female garden connector clicks onto the supplied male spigot. The hose itself does not push directly over this outlet as it would over a barbed hose tail.
The hose-side connector
Choose the female connector for the bore of your hose. A ½-inch garden hose can be used with a matching ½-inch hose connector; it does not need to be ¾-inch just because the tap inlet is ¾-inch BSP.
Check the thread before replacing your tap
The ¾-inch BSP male inlet is identified in the product photograph. BSP is a nominal pipe-thread size rather than a direct measurement across the outside of the thread.
Check the fitting already on your water butt, tank adapter or garden outlet. This listing supplies the tap alone, so it is not a complete through-wall mounting kit.
Isolate the water before removing an old fitting. Start the new thread by hand, use the sealing arrangement appropriate to the joint and avoid overtightening the plastic body.
Attach the hose. Keep the control within reach.
The outlet’s sealing O-ring and quick-connect profile provide the attachment point for a compatible female hose connector. Push the connector on fully and check that it is retained before turning on the water.
Use the orange screw-type knob to adjust the flow. Leave room around the knob and beneath the curved spout so the hose connector can be attached and released without twisting the tap.
Test the threaded joint and coupling after fitting. Support the hose, keep the connector and O-ring clean, and drain exposed fittings before freezing conditions.
Choosing and fitting this tap
Does ¾-inch BSP mean I need a ¾-inch hose?
No. It describes the threaded inlet that attaches the tap to the installation. The outlet uses a garden quick connector. Choose the female connector to match your hose bore, then check that its coupling fits the tap spigot.
Are the nut and washer included for fitting through a tank wall?
This listing supplies one tap with its quick-connect outlet. A mounting nut, washer, bulkhead and other adapters are not included. Choose a mounting arrangement that suits your container and presents the correct connection.
How is the water flow controlled?
Turn the broad orange screw-type knob to open, adjust and close the water flow. This is a round turning control rather than a quarter-turn lever. Operate it gently without forcing it beyond its stopping point.
Can I connect the tap directly to an IBC outlet?
Only if an adapter already fitted to the IBC presents a matching ¾-inch BSP female connection. A large coarse S60x6 IBC thread is a different connection and needs an appropriate adapter. Identify the actual outlet before choosing parts.
Product information & technical details
| SKU | GT-BL-34-001 |
|---|---|
| Product type | |
| BSP thread size | 3/4" |
| Thread gender | Male |
| Colour | Black |
| Material | Plastic |
| Body material | Polypropylene (PP) |
|---|---|
| Control | Orange screw-type turning knob |
| Outlet connection | Male garden quick-connect spigot |
| Outlet direction | Downward-curved spout |
| Hose attachment | Requires a compatible female garden hose connector |
| Supplied item | One bib tap with quick-connect outlet |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.