Description
From a male pond fitting to your choice of hose
A straight adapter with a 1¼-inch BSP female collar and a 20mm, 25mm or 32mm stepped hosetail.
Match the collar to your equipment’s male thread and choose the hose section for the connection you need.
One black plastic connector supplied. Hose, clips and pond equipment are sold separately.
Check the dimensions before planning the hose route
The reference photograph shows an approximately 90mm overall length and a 65mm stepped section.
The broad collar houses the 1¼-inch BSP female thread. That nominal thread size is separate from the hose-bore options along the tail.
Allow room beyond the connector for the hose to seat and bend gradually, with access to inspect the finished joints.
Match both ends before assembly
The equipment connection and the hose need separate checks.
Find the male thread
Confirm a 1¼-inch BSP male fitting on your equipment. Follow its sealing and tightening instructions for the connection; the female collar does not change the required thread size.
Choose the hose section
Check the hose’s 20mm, 25mm or 32mm internal bore and wall profile against the intended step. Confirm seating and securing requirements before trimming or fitting. Size a clip around the outside of the seated hose.
Support the run
Leave a gradual bend beyond the hosetail without sideways pull on the equipment. Keep both joints accessible and check them with water before covering or concealing the installation.
Choosing the female stepped connector
Will this screw into a female threaded port?
No. This adapter has a female thread inside the collar, so it needs a matching 1¼-inch BSP male fitting. It will not screw directly into another female port. Check the equipment’s stated thread size and gender, then choose the hose section separately; a matching hose bore does not establish that the equipment connection is correct.
Does 32mm hose mean I need a 1¼-inch BSP thread?
The 32mm hose step and the 1¼-inch BSP collar are separate specifications. Hose size describes the intended internal bore of the hose; BSP is a nominal thread system. This adapter brings those two connection types together. Match each end to its own specification rather than using an inch label as a physical measurement of the collar.
Do the steps need to be trimmed before fitting?
Confirm the hose size, seating and securing method in the relevant fitting instructions before making any permanent alteration. This adapter offers 20mm, 25mm and 32mm hose sections, but cut positions should not be assumed from another connector. The reference photo shows it uncut at approximately 90mm overall, with a 65mm stepped section.
What else is needed to complete the connection?
The listing supplies one black plastic connector. Hose, clips and pond equipment are separate. Choose a suitable hose for the required step and a securing method compatible with its wall profile. Follow the equipment’s sealing and tightening instructions, leave a supported hose bend and inspect the joints with water before covering the route.
Product information & technical details
| SKU | POND20B25B32B125BSPFSTR001 |
|---|---|
| Product type | |
| BSP thread size | 1.25" |
| Thread gender | Female |
| Barb size | 19mm (3/4"), 20mm (3/4"), 25mm (1"), 32mm (1.25") |
| Colour | Black |
| Material | Plastic |
|---|---|
| Connection layout | Stepped 20mm / 25mm / 32mm hosetail to 1¼-inch BSP female thread |
| Overall length | Approximately 90mm, uncut |
| Stepped section length | Approximately 65mm |
| Contents | One connector; hose, clips and equipment not included |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
All our BSP threads are parallel (BSPP, to ISO 228), not tapered.
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.