Description
Two connections, with a lever at the main spout
Keep a hose connection at the curved spout and a second connection on the lower branch. This nylon dual-outlet lever tap combines a male garden quick-connect plug with a ¾-inch BSP male threaded outlet.
The long blue top lever controls the main spout. The smaller blue side control operates the branch separately, so you can close a connected line without disconnecting its fitting.
One tap with main-spout male quick-connect plug supplied. Hose, female connectors, lower-branch fittings and mounting accessories are sold separately.
A hose connection you can release
The main spout carries a male garden quick-connect plug. Fit a compatible female garden connector to your hose, then clip that connector onto the plug. Select the connector's hose end for your hose's actual bore.
The top lever operates this spout. Before mounting the tap, check that the lever can move freely and that you can reach the hose connector's release collar.
There is no need to select a ½-inch hose simply because the supply inlet is ½-inch BSP: the inlet thread and the connector's hose-gripping size are different measurements.
Choose the fitting for your second line
The lower outlet is a ¾-inch BSP male thread. Use a suitable matching female-threaded fitting for the hose or accessory you want to connect. This tap does not include a second quick-connect adapter or a GEKA coupling.
The smaller blue side control opens and closes this branch independently of the main-spout control. The two outlets still share one supply, so opening both can change the flow available at each.
The branch control is a manual valve. It should not be treated as a non-return valve or as confirmation of backflow protection.
Plan the inlet, mounting and hose runs
Check these three points before fitting the tap to your watering setup.
Match the supply
The inlet is ½-inch BSP male with a brass threaded insert. Check the receiving female thread and the installation's mounting arrangement. A tank outlet, water butt or wall connection may need a separate adapter or support.
Leave working space
Allow room for the long top lever and the small side control. Route hoses so their weight and bends do not pull sideways on the outlets. Use the sealing method required by the particular joint and avoid overtightening.
Connect and check
Isolate the supply before fitting or changing adapters. Restore water gradually and check the inlet, both outlets and both controls. Drain exposed fittings before freezing weather; no frostproof specification is confirmed for this tap.
Choosing and using this lever tap
What comes with the tap?
One nylon dual-outlet lever tap with its main-spout male garden quick-connect plug. Hose, female hose connectors, a lower-branch adapter, wall plates and other mounting or sealing materials are separate.
Can I leave both lines connected?
Yes, with suitable fittings. The long top lever operates the main spout and the smaller blue side control operates the lower branch. Both use the same supply, so the resulting flow depends on your installation.
Does the inlet fit every water butt or IBC?
No. The tap has a ½-inch BSP male inlet. Check the tank's outlet thread and mounting arrangement; a different thread or larger opening needs an appropriate separate adapter.
Is the lower valve a backflow preventer?
No backflow-prevention or non-return specification is confirmed. The lower branch has a manual control valve. Where your installation requires backflow protection, use appropriately specified separate components.
Product information & technical details
| SKU | GT-D-PA-LEVER12Q001 |
|---|---|
| Product type | |
| BSP thread size | 1/2" |
| Thread gender | Male |
| Colour | Black |
| Material | Nylon |
| Supply inlet insert | Brass male threaded insert |
| Main outlet | Male garden quick-connect plug |
|---|---|
| Secondary outlet | ¾-inch BSP male thread |
| Main control | Long blue lever |
| Secondary control | Blue side valve control |
| Quantity supplied | One dual-outlet lever tap with male quick-connect outlet |
| Hose and installation fittings | Not included |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.