Skip to product information
1 of 4

½-inch BSP Nickel-Plated Brass Bib Tap, Hose Tail

½-inch BSP Nickel-Plated Brass Bib Tap, Hose Tail

Regular price £10.69
Regular price Sale price £10.69
Sale Sold out

33 in stock

  • ½-inch BSP male inlet: connect the tap to a suitable female supply fitting. Check the nominal thread size and the space around your installation before ordering; a matching thread alone does not establish water-butt compatibility.
  • Hose tail for ½-inch garden hose: the ridged outlet takes hose with a nominal 13mm internal bore. Push the hose over the tail and secure it with a suitable retaining clip, sold separately. This is a direct hose connection, not a click-fit plug.
  • Nickel-plated brass body with a T-bar handle: turn the handle to control the water. The downward-facing outlet keeps the hose connection below the spout; leave clearance for the handle and for the hose to bend without kinking.
  • One bib tap with hose tail supplied: hose, retaining clips, wall plates, supply adapters and sealing materials are separate. Fit it using the sealing method required by your connection, then restore the supply gradually and check the joints.
View full details

Description

A garden tap for direct hose attachment

Connect a ½-inch garden hose straight to the ridged tail of this nickel-plated brass bib tap. The T-bar handle controls the water, while the downward-facing spout gives the hose a connection below the tap body.

The supply end has a ½-inch BSP male thread. Match it to a suitable female fitting and check the room needed for the handle and hose.

One tap with hose tail supplied. Hose, retaining clip and mounting fittings are separate.

Nickel-plated brass bib tap with T-bar handle and ridged hose-tail outlet, shown uninstalled in an illustrative garden setting
Actual tap shown uninstalled in an illustrative setting. Garden accessories and installation fittings are not included.
½-inch BSPMale supply inlet
½-inch hoseNominal 13mm internal bore
Brass bodyNickel-plated finish
T-bar handleTurn to control the water
Close-up of the actual tap's downward-facing ridged hose tail and knurled collar

Match the hose bore to the tail

The outlet is for ½-inch garden hose, nominally 13mm internal diameter. The hose goes over the ridged tail; use a suitable retaining clip to secure it. Hose and clip are sold separately.

This outlet differs from a garden quick-connect plug. A female click-fit hose connector does not clip directly onto the tail, and the inlet's BSP size is not a measurement of the hose's outside diameter.

Keep the hose supported and allow a gentle bend beneath the tap. Pulling a tight hose sideways against the outlet can strain the connection. Shut off the water and release pressure before removing the hose.

Plan the connection before fitting

Check the supply thread, mounting arrangement and hose clearance together.

Check the female fitting

The tap has a ½-inch BSP male inlet. BSP is a nominal thread size, not the measured outside diameter. A water butt or tank may need a separate mounting adapter, nut or sealing arrangement.

Leave room to use it

Allow room to turn the T-bar and attach the hose underneath the spout. A wall plate or other support may be needed for your installation; none is included.

Fit, test and drain

Isolate the supply before fitting and use the sealing method required by the joint. Avoid overtightening, restore water gradually and check for leaks. Drain exposed taps and hoses before freezing weather.

Before you order

Does this connect to a standard female hose connector?

It has a ridged hose tail for direct attachment of ½-inch hose, not a male quick-connect plug. A female garden click-fit connector does not clip directly onto this tail.

What hose size does the outlet take?

½-inch garden hose, nominally 13mm internal bore. Check the hose's actual bore and secure it with a suitable separate retaining clip.

Will it fit my water butt?

The inlet is ½-inch BSP male. Check your water butt's outlet and mounting arrangement; some need a separate adapter, nut and washer or another sealing method. The thread size alone does not confirm the complete fit.

What is included?

One nickel-plated brass bib tap with its hose-tail outlet. Hose, retaining clips, wall plates, supply adapters, mounting fittings and sealing materials are not included.

Product information & technical details

SKUGTBIB12B001CH
Product typeBib Tap
BSP thread size1/2"
Thread genderMale
ColourSilver
MaterialBrass
FinishNickel-plated
Outlet typeRidged hose tail
Hose size½-inch hose; nominal 13mm internal bore
Hose retentionSuitable retaining clip required; sold separately
ControlT-bar turn handle
Quantity suppliedOne bib tap with hose tail
Hose and installation fittingsNot included
What is BSP?

What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.

These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:

  • 3/8" BSP → 16.66 mm
  • 1/2" BSP → 20.95 mm
  • 3/4" BSP → 26.44 mm
  • 1" BSP → 33.25 mm
  • 1.25" BSP → 41.91 mm
  • 1.5" BSP → 47.80 mm
  • 2" BSP → 59.61 mm
  • 3" BSP → 87.88 mm
  • 4" BSP → 113.03 mm

All our BSP threads are parallel (BSPP, to ISO 228), not tapered.

Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.

All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.

If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.

Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.

Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.

Please see our shipping policy for further information.

All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.

If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.

Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.

If we are unable to repair the fault, we may offer either a replacement or a full refund.

In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.

Please see our warranty policy for further information.

You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.

To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.

Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.

If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.

If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.

For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.

Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.

Please see our refund policy for further information.

All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.

If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.

Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.

Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.

Please see our shipping policy for further information.

All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.

If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.

Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.

If we are unable to repair the fault, we may offer either a replacement or a full refund.

In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.

Please see our warranty policy for further information.

You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.

To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.

Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.

If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.

If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.

For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.

Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.

Please see our refund policy for further information.