Type B
Female coupler with two cam arms at the wall. Choose this to accept an existing matching ¾-inch male camlock. A hose-tail half is not included.
Description
Keep the supply fixed. Release the hose.
A 25mm MDPE wall backplate and ¾-inch camlock gives your pipe supply a fixed connection point, with a coupling you can separate when the hose needs to move.
Choose a single camlock half to match an existing connection, or a paired kit with a 19mm hose tail. The cam arms secure the coupling; they do not switch the water off.
Which side stays at the wall?
All four choices use the same 25mm MDPE backplate. The camlock arrangement changes.
Type F
Male adapter at the wall, with no cam arms of its own. Choose this to accept an existing matching ¾-inch female camlock coupler. A hose-tail half is not included.
Type B+E
Type B female coupler stays at the wall. The supplied Type E male adapter separates with the hose and has a ¾-inch hosetail for nominal 19mm internal-bore hose.
Type F+C
Type F male adapter stays at the wall. The supplied Type C female coupler carries the cam arms and a ¾-inch hosetail for nominal 19mm internal-bore hose.
Fit once. Disconnect with care.
Support the pipe and hose, and provide an upstream way to isolate the water.
Mount and connect
Fix the three-hole backplate to a sound surface. Prepare the 25mm OD MDPE pipe and follow the fitting instructions for liners, insertion depth and nut tightening. Seal the BSP joint appropriately; PTFE tape is not supplied.
Seat the hose fully
For B+E or F+C, fit nominal 19mm internal-bore hose over the complete hosetail and secure it with suitable retaining clips. Support the hose separately so its weight does not pull on the wall fitting.
Isolate before releasing
Shut off the supply upstream and release pressure before opening either cam arm. Open both arms to separate the coupling. Before reconnecting, check the sealing faces and gasket are clean, seat the male half fully and close both arms.
Check before ordering
Are 25mm pipe and ¾-inch hose the same size?
No. The MDPE fitting takes pipe measured at 25mm outside diameter. The hose-tail options take nominal ¾-inch, or 19mm, internal-bore hose. The ¾-inch camlock size and BSP thread are nominal connection designations; match each connection rather than treating these measurements as interchangeable.
Will the water stop when I disconnect the camlock?
No. This is a detachable coupling, not a self-closing connector or valve. Isolate and depressurise the supply before separating it. Check that the polypropylene camlock, gasket, pipe and hose are suitable for your intended fluid and working conditions.
Product information & technical details
| SKU | WF25KIT027[#ML] |
|---|---|
| Product type | |
| Barb size | 19mm (3/4") |
| Camlock type | Type B, Type C, Type E, Type F |
| Camlock size | 3/4" |
| Camlock gender | Male, Female |
| MDPE size | 25mm |
| Kit parts | 25mm MDPE Flange, Camlock Fittings |
| Colour | Black, Grey |
|---|---|
| Material | Plastic |
| Pipe and threaded joint | 25mm OD MDPE compression inlet. Wall flange has a ¾-inch BSP female socket; Type B or Type F camlock has the matching male thread. |
| Camlock arrangement | B: female at wall. F: male at wall. B+E: female at wall and removable male hosetail. F+C: male at wall and removable female hosetail. |
| Hose-tail options | B+E and F+C include a ¾-inch hosetail for nominal 19mm internal-bore hose. Type B and Type F alone do not include a hosetail. |
| Camlock material and isolation | Polypropylene camlock fittings. No shut-off valve or self-closing function; isolate and depressurise upstream before disconnecting. |
| Installation extras | MDPE pipe, hose, retaining clips, supports, wall fixings, any required pipe liners and thread-sealing materials are not included. |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
All our BSP threads are parallel (BSPP, to ISO 228), not tapered.
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.