Description
Two irrigation lines. One shut-off point.
Branch water from a matching IBC into two 19mm tubing runs. A compact S60x6 cap connects the plated brass lever valve to the tank, while the black Antelco tee provides the two barbed outlets.
Three parts supplied: the tank cap, lever valve and threaded tee. One lever controls the supply to both branches together.
Tank, existing tank valve, tubing, clips and PTFE tape are separate.
A single supply, split at the tee
The valve has a ¾-inch BSP male inlet that screws into the tank cap, and a female outlet that accepts the tee's matching male branch. The two opposite barbs then carry water into separate tubing runs.
The Antelco 45215 tee has a polypropylene body and tapered entries for fitting suitable 19mm low-density polyethylene irrigation tubing. The tubing goes over the barbs; it does not click on like a garden hose connector. Secure each joint with a suitable clamp or clip selected for the actual tubing outside diameter.
The red lever opens and closes the common supply. There are no separate branch valves. Water can feed both lines, but their flow will depend on the tank level, hose lengths, height differences and connected equipment. The tee does not guarantee an equal split or raise pressure.
The 19mm tubing connection and the ¾-inch BSP assembly threads describe different interfaces. Match each connection separately rather than treating BSP as a hose-diameter conversion.
Set up the tank and tubing connections
Check the tank thread
The cap needs a male S60x6 tank or valve outlet, nominally 60mm with a 6mm coarse pitch. Check the actual thread and washer condition before fitting. This kit uses a compact cap, not a swivel extender.
Fit and support both lines
Close the tank supply, start the threads square and use suitable BSP joint sealing where needed. Push the tubing fully over each barb, secure it and support both runs so they do not pull on the tee. PTFE tape is sold separately.
Open and check
Allow room for the lever and tubing. Open the water gradually and inspect every joint. Check that your intended irrigation equipment can work with the available tank head; this kit is not a pump. Close the supply and release trapped pressure before disconnecting.
Planning the two branches
Can I switch each branch on and off separately?
No. The supplied lever valve controls both tee outlets together. Independent branch control would require separate suitable valves in the tubing runs; they are not included.
What comes in the IBC001X kit?
One S60x6 cap with a ¾-inch BSP female port, one plated brass male-to-female lever valve and one Antelco 45215 threaded tee with two 19mm barbed ends. Tubing, clips, tank and PTFE tape are separate. The assembly photograph shows the same kit before and after joining the tee, not two kits.
Product information & technical details
| SKU | IBC001X |
|---|---|
| Product type | |
| BSP thread size | 3/4" |
| IBC thread size | S60X6 (2") |
| Barb size | 19mm (3/4") |
| Kit parts | S60x6 tank cap with ¾-inch BSP female port, Plated brass ¾-inch BSP male-to-female lever valve, Antelco 45215 tee with two 19mm barbs and ¾-inch BSP male branch |
| Colour | Black, Silver |
|---|---|
| Material | Plastic, Brass |
| Tee model | Antelco 45215 |
| Valve body | Plated brass, silver finish |
| Branch control | One lever valve controls both tee outlets together |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
All our BSP threads are parallel (BSPP, to ISO 228), not tapered.
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.