Description
A smaller inlet with a downward outlet
This 150mm polypropylene tap combines a ½-inch BSP male inlet with a 90° downward barbed outlet. Use the blue lever to control dispensing from a matching tank fitting.
Check the fitted position leaves space for your watering can or hose.
One tap supplied. Tank adapter, hose, clips and sealing materials are separate.
Two ends with different jobs
The ½-inch BSP male thread is the inlet. It screws into a corresponding female fitting on the tank or an adapter. Check what is already installed: an IBC’s original coarse-thread outlet is a different connection.
The stepped tail is the dispensing end. Use it to pour directly into a container, or fit suitable flexible hose over the tail and secure it appropriately. It is not a garden quick-connect spigot.
Choose the hose by its fit over the actual tail. A BSP inlet name describes a thread and cannot be used on its own to select the hose bore.
Make room for the container and the handle
Check the complete installation before filling the tank.
Match the inlet first
Confirm a ½-inch BSP female connection is available. Start the thread by hand and use the sealing arrangement appropriate to the mating fitting, without overtightening the plastic body.
Check the fitted reach
The 150mm tap length is not a guaranteed distance from the tank wall to the outlet. Part of the inlet enters the fitting, and an adapter can change the position. Leave space beneath the spout for your watering can or bucket.
Keep the lever accessible
Allow the blue handle to move freely without touching nearby fittings. Support an attached hose so it cannot pull or twist the tap while you are watering.
Fitting and first use
Isolate the supply or lower the water below the outlet before replacing a tap. Inspect the threads and sealing surfaces, then fit the tap with the outlet facing down.
Introduce water gradually and inspect the inlet joint and any hose connection before leaving the tank in use. Close the lever after dispensing and drain exposed fittings before freezing conditions.
Questions about the half-inch tap
Is 150mm the reach from my tank wall?
It is the tap length. The installed reach depends on how much thread enters the fitting and whether an adapter is used. Check the final outlet position and the space below it rather than treating 150mm as wall clearance.
Does the inlet take a ½-inch hose?
The ½-inch BSP designation identifies the male inlet thread, not the hose-tail size. The hose connects at the separate stepped outlet, so check its actual fit and secure it with an appropriate clip.
Can it replace any water-butt or IBC tap?
It needs a matching ½-inch BSP female connection. Some tanks use another thread or need a bulkhead fitting or adapter. Identify the connection on your own container before choosing a replacement.
What is supplied with this model?
One polypropylene lever tap is supplied. Hose, clips, tank adapters and sealing materials are separate, so choose those parts to suit your existing installation.
Product information & technical details
| SKU | IBCTAP12BSPM-90D-001 |
|---|---|
| Product type | |
| BSP thread size | 1/2" |
| Thread gender | Male |
| Colour | Grey |
| Material | Plastic |
| Body material | Polypropylene (PP) |
| Tap length | 150mm |
|---|---|
| Inlet connection | ½-inch BSP male |
| Outlet direction | 90° downward |
| Outlet style | Stepped barbed tail |
| Control | Blue lever handle |
| Supplied quantity | One tap |
| Application | Stored-water dispensing and garden watering |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.