Description
Plan the turn for your 50mm hose
Connect suitable 50mm-bore hose to a matching threaded port with this black plastic elbow.
A 2-inch BSP male thread and a ribbed 50mm hosetail meet at a fixed 90° bend. Check both connections before planning the route around your pond equipment.
One connector supplied. Hose, clips, pump and filter are separate.
Check the joint. Support the run.
Give the hose space to bend without loading the port.
Confirm the female thread
Use a compatible 2-inch BSP female port. Read the equipment’s thread and sealing specification. Hose bore and nominal BSP size are different measurements even when both are described as 2-inch.
Match the hose profile
The hosetail is sized for suitable 50mm-bore hose. Check the wall construction and the required securing method, then allow room to seat the hose and access the connection.
Keep a gradual curve
Arrange the hose beyond the elbow with a broad bend and adequate support. Avoid pulling it tight or using the fitting as a support for an unsupported hose run. This is a fixed elbow, not a swivel.
One elbow for the connection you have checked
The package contains the elbow only. Choose any hose, clips and sealing parts separately to suit your installation. Follow the equipment’s tightening instructions for plastic fittings and check the assembled joints with water before concealing them.
When replacing an existing connector, compare the hose bore and thread specification as well as the angle. A similar-looking elbow or an inch label on its own is not enough to confirm the fit.
Questions about the 50mm elbow
Are 2-inch hose and 2-inch BSP the same connection?
No. A 50mm hose bore is commonly called 2-inch, whereas 2-inch BSP is a nominal thread specification. The hose slides over the barbed end; the male thread screws into a compatible female BSP port. Match both ends to the equipment, rather than assuming the same inch wording means the hose and threaded port have identical dimensions.
Will this increase my pump’s flow rate?
This elbow provides a 50mm hose connection and a 90° change of direction; it does not establish a flow rate. Pump performance, the other fittings, hose length, bends and elevation all affect a system. Use the bore and connection arrangement specified for your equipment rather than selecting it from an assumed capacity or litres-per-minute figure.
How much room should I leave around the elbow?
Allow enough access to fit the threaded end, seat the hose and install any required securing parts. Beyond the barb, the hose should follow a broad supported curve rather than a tight fold. Check the actual equipment and hose before assembly, keep the hose’s weight off the port and leave the joints accessible for inspection.
What is included with the connector?
One black plastic elbow is supplied. Hose, hose clips, pump and filter are not included. The description image is a neutral illustration of the connector style, not a measured drawing. Use the written 50mm hosetail and 2-inch BSP male specifications, follow the equipment’s sealing and securing instructions, and inspect both joints with water after assembly.
Product information & technical details
| SKU | POND50B2BSPMELB001 |
|---|---|
| Product type | |
| BSP thread size | 2" |
| Thread gender | Male |
| Barb size | 50mm (2") |
| Colour | Black |
|---|---|
| Material | Plastic |
| Connection layout | Fixed 90° elbow: 50mm hosetail to 2-inch BSP male thread |
| Thread size convention | 2-inch BSP is a nominal pipe-thread size, separate from the 50mm hose bore |
| Contents | One elbow connector; hose, clips, pump and filter not included |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
All our BSP threads are parallel (BSPP, to ISO 228), not tapered.
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.