Match the tap inlet
The male 1-inch BSP inlet screws into a matching female BSP fitting. The tap length is 170mm; the reach from the tank wall will depend on the fitting and how far the inlet engages.
Description
An angled tap with PTFE tape
This bundle pairs a 45° polypropylene lever tap with one roll of PTFE thread-sealing tape for a compatible water-butt or rainwater-tank fitting.
The tap has a 1-inch BSP male inlet, a blue control lever and a downward-facing hose tail. Check the tank connection and available space before fitting.
One tap and one tape roll supplied. Tank adapter, hose and clips are separate.
1 tapGrey PP body, blue lever
1 tape rollPTFE thread-sealing tape
1-inch BSPMale supply inlet
45°Angled hose-tail outlet
Two items, ready for your fitting job
The 170mm tap provides the flow control and angled outlet. The separate roll of PTFE tape is for thread sealing where appropriate to the mating fitting.
This is tape on a roll, rather than a flat sealing washer. Choose the sealing method required by the joint you are fitting; included tape does not make a mismatched thread suitable.
The bundle does not include a tank adapter, bulkhead fitting, hose or hose clips. If you are replacing an existing tap, check its inlet specification before ordering.
Check the connection before using the tape
Thread size, container outlet and hose fit are separate checks.
Identify an IBC adapter
A large original IBC outlet is not automatically 1-inch BSP. An appropriate separate adapter may be needed to connect that outlet to this tap.
Match the hose tail
The ridged spout fits inside suitable flexible hose. Match hose to the tail and secure it appropriately. The inlet’s BSP label does not identify the hose bore.
Use the tape at the threaded joint
Isolate the water supply or empty the container below the outlet before replacing the tap. Check the mating thread and its required sealing method, then apply thread tape where appropriate, keeping loose material clear of the water passage.
Fit carefully without overtightening the plastic body. Introduce water gradually and inspect the inlet joint before filling or leaving the tank in use.
Support an attached hose so it cannot pull on the tap. Close the lever after dispensing, and drain exposed fittings before freezing weather.
Questions about the tap and PTFE bundle
Is the PTFE supplied as tape or a washer?
One roll of PTFE thread-sealing tape is supplied separately from the tap.
Does the tape make this fit any tank outlet?
No. The tap needs a matching 1-inch BSP female connection. Tape is a sealing material, not a thread adapter. Check your tank outlet and any adapter already fitted.
Will a normal click-on hose connector attach to the spout?
Not directly. The outlet is a ridged hose tail for suitable flexible hose, rather than a garden quick-connect plug. Match the hose bore to the tail and use an appropriate clip.
What else do I need for fitting?
That depends on the existing container connection and whether you want a hose attached. A tank adapter, bulkhead fitting, hose or hose clips may be needed; these are separate from the one tap and tape roll supplied here.
Product information & technical details
| SKU | IBCTAP1BSPM-45D-001BRADAS-PTFE |
|---|---|
| Product type | |
| BSP thread size | 1" |
| Thread gender | Male |
| Colour | Grey |
| Material | Plastic |
| Body material | Polypropylene (PP) |
| Outlet angle | 45° downward angle |
|---|---|
| Tap length | 170mm |
| Control | Blue lever handle |
| Outlet style | Ridged hose tail |
| Included tap | One tap with 1-inch BSP male inlet |
| Included tape | One roll of PTFE thread-sealing tape |
| Application | Water butt and rainwater tank dispensing |
What is BSP?
What is BSP thread size?
BSP (British Standard Pipe) is a nominal pipe-thread size, not a direct measurement of a fitting’s bore or outside diameter. For example, a ½-inch BSP male thread measures about 21mm across its outer thread crests.
These figures are approximate outside diameters of male BSP threads, to help identify the nominal size. They are not inch-to-millimetre unit conversions:
- 3/8" BSP → 16.66 mm
- 1/2" BSP → 20.95 mm
- 3/4" BSP → 26.44 mm
- 1" BSP → 33.25 mm
- 1.25" BSP → 41.91 mm
- 1.5" BSP → 47.80 mm
- 2" BSP → 59.61 mm
- 3" BSP → 87.88 mm
- 4" BSP → 113.03 mm
Measure across the outside of a male thread, then check its pitch and whether it is parallel or tapered. Diameter alone does not confirm compatibility. Check the product’s stated thread specification before connecting.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.