Description
Take the watering line into another row
Keep a supply run going and add a side branch where the planting layout needs it. This equal tee makes a fixed T junction between three matching pipe lengths.
The Antelco 47605 has three 19mm double-barbed tails for suitable LDPE irrigation tube. Two connections form the straight run; the third branches off at a right angle.
One tee supplied. Pipe, retaining clips and plants shown in the installation are not included.
Three equal tube connections
All three tails fit nominal 19mm internal-diameter LDPE tube. LDPE means low-density polyethylene. Match the tube bore and material specification; an outside-diameter pipe label is a different measurement.
The actual product photo shows the two retaining barbs on each tail and the shoulders near the central body. In the finished joint, the pipe covers the barbs. Any added clamp must suit the tube and assembled joint.
The tee uses UV-stabilised acetal plastic and has an operating limit of 300kPa (3bar). It connects the branches but does not balance their flow or regulate pressure. Pipe lengths, outlets and any control valves remain part of the wider irrigation design.
Give each connection a supported route
Lay out the T junction
Isolate the supply and release pressure. Arrange the straight run and side branch so the pipes reach the fitting without pulling it sideways or forcing a tight bend.
Seat all three pipes
Prepare clean, sound tube ends following the tubing system’s instructions. Push each end over both barbs towards its stop shoulder, and add compatible retention where required.
Check the whole watering run
Support the branches before restoring water gradually within the system’s limits. Inspect all three joints and check delivery at the outlets. Use suitable separate controls if a branch needs balancing or isolation.
Planning your irrigation branch
Is this a Y connector or a tee?
It is a T-shaped tee: two tails are in a straight line and the third branches at a fixed right angle. All three tails are the same nominal 19mm size. It is not a Y splitter or a reducing tee.
Will both branches get the same amount of water?
Not automatically. Flow depends on the supply, pipe lengths, outlet demand and other parts of the system. This tee connects the pipes; it does not balance flow or provide an individual shut-off for either branch.
Do the double barbs mean clamps are never needed?
No. The range is designed for high retention in correctly matched quality low-pressure LDPE tube. Confirm compatibility with the tubing manufacturer or test the intended assembly, and follow its retention requirements. Extra clips are sold separately.
Does the pack include pipe or three clips?
No. One Antelco 47605 tee is supplied. The three pipe lengths and clips in the installation illustrate how it can be fitted; they are separate items. Choose tube by its nominal 19mm bore and match clips to the actual fitted outside diameter and system requirements.
Product information & technical details
| SKU | A47605-TEE19DB001 |
|---|---|
| Product type | |
| Barb size | 19mm (3/4") |
| Colour | Black |
| Material | Plastic |
| Manufacturer / model | Antelco 47605 |
| Connection design | Equal T junction; two barbs on each of three tails |
|---|---|
| Tube type | Suitable 19mm internal-diameter LDPE irrigation tube |
| Material grade | UV-stabilised acetal plastic |
| Maximum operating pressure | 300kPa (3bar); observe the complete system’s limits |
| Supplied quantity | One tee; pipe and retaining clips sold separately |
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.