Description
Keep the watering line going
Extend a run or reconnect two sound tube ends without changing the pipe size. A straight joiner keeps the route simple when another length is needed.
The Antelco 46985 double-barb joiner connects two suitable 19mm-bore LDPE irrigation pipes. Each pipe covers one insertion tail and meets the central stop flange.
One joiner supplied. Pipe, retaining clips and plants shown in the installation are separate items.
More grip inside each tube end
The actual product photo shows the two barbs on each tail. Once fitted, those sections sit inside the pipe; only the central stop remains between the two tube ends. The gap between the barbs provides space for extra retention where the tubing system requires it.
Match the fitting to nominal 19mm internal-diameter LDPE tube. LDPE means low-density polyethylene. Check both the bore and tubing specification: a pipe labelled by its outside diameter is not automatically the same fit.
UV-stabilised acetal plastic suits outdoor irrigation use. The joiner’s operating limit is 300kPa (3bar); pipe and other components must also be suitable. The connection maintains the route but does not control or reduce the supply pressure.
Make the joint without straining the pipe
Start with sound tube
Turn off the water and release pressure. If repairing a damaged run, remove the affected section and prepare clean ends as directed by the tube manufacturer. Allow enough pipe length to meet without pulling.
Push both ends to the stop
Fit each pipe over both barbs towards the central flange. Confirm the tubing is compatible and follow its retention guidance. Any added clip must suit the type and outside diameter of the assembled joint.
Support and check the connection
Support the run so movement or hanging weight does not load the joint. Restore water gradually within the complete system’s limits, then inspect both connections before leaving the line in service.
Before joining the pipe
Is 19mm the pipe’s inside or outside diameter?
It is the nominal internal diameter of the matching LDPE tube. Check the tube’s bore and fitting specification; 19mm outside-diameter pipe and ¾-inch BSP threads describe different connections.
Can I use it without clamps?
The double-barb range is designed for high retention in correctly matched quality low-pressure LDPE tube. Confirm suitability with the tubing manufacturer or test the assembled connection under the intended conditions. Follow any retention requirements; extra clamps are separate items.
Can it join two different pipe sizes?
No. Both ends of this joiner fit the same nominal 19mm tube bore. Choose a correctly sized reducing joiner if you need to connect different bores, rather than forcing a smaller pipe or relying on a clamp to hold an oversized one.
Is it a quick-release fitting or a kit?
Neither. One fixed barbed Antelco 46985 joiner is supplied. The pipe fits over the insertion tails; there are no release collars. Pipe and retaining clips shown in the installation image are not included. Isolate and depressurise the line before working on a connection.
Product information & technical details
| SKU | A46985-STR19DB001 |
|---|---|
| Product type | |
| Barb size | 19mm (3/4") |
| Colour | Black |
| Material | Plastic |
| Manufacturer / model | Antelco 46985 |
| Tube type | Suitable 19mm internal-diameter LDPE irrigation tube |
|---|---|
| Connection design | Straight, equal-bore, two barbs per end |
| Material grade | UV-stabilised acetal plastic |
| Maximum operating pressure | 300kPa (3bar); observe the complete system’s limits |
| Supplied quantity | One joiner; pipe and retaining clips sold separately |
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.
All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.
If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.
Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.
Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.
All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.
If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.
Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.
If we are unable to repair the fault, we may offer either a replacement or a full refund.
In cases where the item is inspected and found not to be faulty, or where damage is determined not to be due to manufacturing defects, you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.
You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully, taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.
To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.
Returned items must be in the same condition in which you received them: unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.
If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.
If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value, or refuse the return entirely, depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.
For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.
Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered (such as a tarpaulin or pond liner resized to your specifications), or any product showing damage beyond normal inspection handling.