Skip to product information
1 of 7

½-inch to ¾-inch Hose Mender Reducer, White/Grey

½-inch to ¾-inch Hose Mender Reducer, White/Grey

Regular price £6.19
Regular price Sale price £6.19
Sale Sold out

100 in stock

  • Join two different hose sizes — connect compatible ½-inch and ¾-inch garden hose directly. The quoted sizes refer to the hose internal diameters: approximately 13mm and 19mm, rather than the fitting’s outside width.
  • Two screw-on retaining nuts — the smaller end holds the ½-inch hose and the larger end holds the ¾-inch hose. Seat each hose on its matching gripping end, then tighten its retaining nut by hand.
  • Repair or extend a mixed-size run — join sound hose ends after removing a damaged section, or connect two existing lengths. Check both hose sizes and leave slack at the joint; cutting out damage shortens the hose.
  • One white/grey plastic mender supplied — includes the central reducing body and both retaining nuts. Hose is separate. Open the tap gradually to check the completed joint, then turn off and drain after use.
View full details

Description

Connect a smaller hose to a larger one

This ½-inch to ¾-inch garden hose mender joins two compatible hose ends of different sizes. Use it to connect existing lengths or repair a mixed-size run where the remaining hose is sound.

The white retaining nuts secure each hose to the grey central body. One end is sized for ½-inch hose, approximately 13mm internal diameter; the other takes ¾-inch hose, approximately 19mm internal diameter.

One white/grey reducing mender supplied, with both retaining nuts. Hose is sold separately.

White and grey reducing hose mender showing its unequal retaining nuts and central gripping body in an illustrative garden setting
Illustrative garden setting. One mender supplied; hose and garden props are not included.
½-inchSmaller hose bore
¾-inchLarger hose bore
2 nutsHand-tightened hose retention
1 menderStraight reducing connection
Actual grey reducing mender body with both white retaining nuts removed, showing the smaller and larger gripping ends

The retaining nuts make the connection

The photograph shows the central body with the nuts removed. Its two differently sized gripping ends sit inside the hose ends. Slide each white nut onto its hose before seating the hose on the matching end, then tighten the nut by hand.

Match the hose bore, not its outside diameter or the width of a tap thread. Check that both hose ends are flexible, round and free from splits. A brittle or stretched end may need trimming or replacing before it can form a sound joint.

The threads visible on the body are for the retaining nuts. They are not BSP tap connections, and the mender does not use a pair of garden click sockets.

Make the joint on sound hose

Turn off the water and release pressure before starting.

Check both sizes

Use ½-inch hose at the smaller end and ¾-inch hose at the larger end. If you are repairing damage, remove the damaged section and check that the remaining length will still reach comfortably.

Seat and tighten

Loosen the nuts, put the correct nut onto each hose and seat the hose on its matching gripping end. Tighten by hand and leave slack around the joint so it is not pulled sideways.

Check under water flow

Open the tap gradually and inspect both ends for movement or drips. Turn the water off and release pressure before adjusting. After watering, close the tap and drain before storage.

Questions about the reducing hose mender

Are 13mm and 19mm the hose inside diameters?

Yes. They are rounded equivalents of the nominal ½-inch and ¾-inch hose bores. They do not describe the outside diameter of the hose, the retaining nuts or a BSP thread.

Can it join two hoses of the same size?

This version has one ½-inch end and one ¾-inch end. For two hoses of the same size, choose a straight mender with matching ends rather than trying to force a hose onto the wrong side of this reducer.

Does it need separate garden quick connectors?

No. It attaches directly to the two bare hose ends using its central body and included retaining nuts. It does not clip onto the female sockets found on hose-end quick connectors.

Will the reducer increase the flow from a smaller hose?

No. It provides a connection between the two hose sizes; it does not boost the water supply. Available flow still depends on the supply, hose lengths, smaller bore and other fittings in the run.

Product information & technical details

SKUHOCON12-34MEND001WL
Product typeHosepipe Connector
ColourGrey, White
MaterialPlastic
Smaller hose end½-inch nominal internal diameter (approximately 13mm)
Larger hose end¾-inch nominal internal diameter (approximately 19mm)
Connection formStraight reducing hose-to-hose mender
Hose attachmentTwo screw-on retaining nuts with gripping ends
Quantity suppliedOne reducing mender with both retaining nuts
Hose includedNo

All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.

If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.

Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.

Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.

Please see our shipping policy for further information.

All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.

If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.

Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.

If we are unable to repair the fault, we may offer either a replacement or a full refund.

In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.

Please see our warranty policy for further information.

You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.

To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.

Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.

If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.

If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.

For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.

Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.

Please see our refund policy for further information.

All delivery times are estimates and not guaranteed. Orders placed before 1 pm, Monday to Friday (excluding bank holidays), will be dispatched the same day, while orders placed after 1 pm will be dispatched by the end of the next working day.

If an invalid postcode or address is provided, the order will be cancelled without further notice, as we are unable to modify addresses or print labels for invalid postcodes.

Our standard delivery option is Royal Mail Tracked 48, which typically takes 3–5 business days. If you need your order more quickly, Expedited delivery via Royal Mail Tracked 24 is available, offering a 1–2 business day service.

Large or bulky items may be sent via courier at our discretion and are usually dispatched for next-day delivery. Please note that we only ship to mainland UK addresses; delivery to non-mainland locations, including the Highlands & Islands, may not be available for large or heavy items. If your address falls into one of these areas and you wish to purchase such items, please contact us with your postcode and order details before placing your order. If we cannot ship to you, you are welcome to arrange your own courier for collection.

Please see our shipping policy for further information.

All products, unless otherwise stated, come with a standard manufacturer warranty against faulty workmanship.

If your product fails within six months of delivery, please contact us with your order reference number, a description of the issue, and clear images illustrating the fault.

Should your item require a return for further investigation, it is your responsibility to arrange and cover postage back to us.

If we are unable to repair the fault, we may offer either a replacement or a full refund.

In cases where the item is inspected and found not to be faulty—or where damage is determined not to be due to manufacturing defects—you will not be entitled to a refund or replacement. We will then either return the item to you via standard post or dispose of it at your request.

Please see our warranty policy for further information.

You may return any order within 14 days of delivery. As soon as you receive your items, please inspect them carefully—taking reasonable care to keep both the product and its packaging clean and undamaged. If you discover an error or defect after 14 days, we reserve the right to decline your return. If your product fails or breaks after this 14-day time window then your order may be eligible for a warranty claim, please see our warranty information for more details.

To initiate a return, please contact us via our contact form to obtain a return authorisation and the correct returns address (different from the address on your invoice). This can also be done through your 'recent orders' page on your account if you are registered with Shop. Returns sent without prior authorisation will be discarded.

Returned items must be in the same condition in which you received them—unworn or unused, with tags attached and in their original packaging. You must include either a copy of your invoice or a slip with your order reference number inside the parcel. Please be sure not to obscure your return reference number on the label.

If you refuse delivery or reject the parcel without prior notice, we will inspect the returned package and issue a refund upon receipt. Although there is no restocking fee, we will deduct the cost of the return postage label (£3.35) from your refund.

If the returned item or its packaging shows signs of use, damage, or staining, we may deduct up to 50% of the order value—or refuse the return entirely—depending on its condition. Examples include damaged tags, stained, modified or damaged packaging, or missing components.

For faulty, incorrect, or damaged items, please contact us before sending anything back so we can attempt to resolve the issue directly. If we agree that a return is necessary due to our error, we will provide you with a pre-paid return label.

Products that have been modified or damaged through customer action are not eligible for return. This includes, but is not limited to, items that have been cut, trimmed or otherwise altered—such as a tarpaulin or pond liner resized to your specifications—or any product showing damage beyond normal inspection handling.

Please see our refund policy for further information.